E-Ink displays

Epaper displays soportados por el Firmware

GOODISPLAY 2232x1680	GDEW101C01 10.1 inch e-paper display DES full color large 2232x1680 nice and big 10.1" epaper with Color filter on top. Amazing technology and panel but hard to drive with EPDiy V7 board. Sending the huge 1.8Mb buffer takes about 2.2 seconds at full speed. https://reinkstone.com has built an epaper color tablet with this model. But they use a multi-core Linux and is of course faster than what I've tried.	web Detalles
Waveshare 1872x1404	ED078kc2 Raw 7.8 parallel epaper This is an E-Ink raw display, 7.8inch, 1872×1404 resolution, communicating via parallel port, supports partial refresh. Cale-idf does not support this display but it is supported be Lovyan GFX. For a JPG render example please check this demo: jpg-render-it8951.cpp	web Detalles
Unknown 1600x1200	ED133UT2 ED133UT2 is a 13.3 inch 8-bit parallel epaper display	web Detalles
Eink 1448x1072	EC060KH3 Parallel interface, 8 bits	web Detalles
Waveshare 1304x984	12.48inch Epaper display module Big 12 inches epaper from Goodisplay/Waveshare that is great for showing events in the office and it's 4 SPI epapers combined together. Our component Cale-idf is the first to make an ESP32 class with GFX to drive it.	web Detalles
EINK 1280x720	ED052TC4 A nice display we can find in Inkplate v2	web Detalles
Radionica 1200x825	ED097TC* / Inkplate 10 A low-power, easy-to-program, open-hardware e-paper display with Wi-Fi support and a 9.7" screen	web Detalles
Generic 1024x768	Parallel 6 inches Driven by https://github.com/vroland/epdiy	web Detalles
LILYGO 960x540	T5-4.7 inch E-paper ED047TC1 Supported in our ESP-IDF component Cale-idf via EPDiy component, this super fast HD parallel epaper module with 16 levels of gray, has a ESP32 V3 version 16MB FLASH 8MB and is a great module to build IoT gadgets: parallel/ED047TC1.h Please note that this epaper is not supported in our arduino-esp32 Firmware (github.com/martinberlin/eink-calendar) since it's a parallel eink. There are 3 different choices to drive it with ESP32: Using Cale-idf (ESP-IDF Framework only) Class name: parallel/ED047TC1.h Using EPDiy: github.com/vroland/epdiy This component works great and has both ESP-IDF and Arduino-esp32 support. We collaborated also with this repository adding software rotation. Using original Lilygo EPD47 Repository. This option will also work specially if you are using Arduino IDE but is not recommended, since it uses an old version of EPDiy library, that has no software rotation and features missing. But it can be used as a starting point to test your display.	web Detalles
GOODISPLAY 960x640	GOODISPLAY / DKE 10.2" Resolution 960(H) x640(V),Active Area 215.52143.68,Outline Dimension 224(H)157(V)*1.0(D),IC is SSD1677,SPI interface. This model is also available from brand DKE	web Detalles
Waveshare 880x528	7.5" HD This epaper took some trial and error to get it running since the Waveshare demo file did not have the right SPI commands. Only the black version is implemented but it won’t be hard to get the red/black working. It has a very nice resolution, costs almost the same as the V2 version 800*480, having 10% more resolution. Fonts render very nice using Adafruit GFX and our class.	web Detalles
Good Display 800x480	7.5" B B/R B/Y Higher resolution(800x480) than GDEW075T8(640x384) this epaper IC Driver is UC8179 and is supported by Cale-idf.	web Detalles
Radionica 800x600	Inkplate 6 Inkplate is a project that refurbishes Kindle screens with an ESP32 and a lot of extra goodies. We like it very much. Sadly, the black is not "as black" as in other Goodisplay models, but the refresh speed is awesome and we think the parallel communication protocol with fast refresh is where all future epaper technology is heading. We do not support this epapers in Cale-idf but there is an Inkplate-platformio implementation ready to be compiled in this display.	web Detalles
GOODISPLAY 800x960	gdew075T7 x2 vertical Two 800x480 vertically aligned epapers making it a 800x960 combined display	web Detalles
GOODISPLAY 648x480	5.83" Black/Red This is a new B/Red display with UC8179 controller. Works nicely and resolution is very good and sharp. Check a refresh video in Twitter Feel free to check our repository Cale-IDF for great integrations and demos using this epaper display. WiKi article: https://github.com/martinberlin/cale-idf/wiki/color-GDEW0583Z83-648x480-B%7CR	web Detalles
Good Display 640x384	7.5" B/W B/R Lower resolution than GDEW075T7 (800x480) this epaper is supported by Cale-idf: gdew075T8.h black/white please note that this epaper is marked as EOL (End of lifetime and not anymore listed in Goodisplay website) gdew075z09.h black/red model	web Detalles
Waveshare 640x400	wave4i7color 4.01 inches This class is only supported for now in our own Firmware Cale-idf. Controller: SPD1656 This resolution works in the Waveshare 4.01 inches 7 colors epaper	web Detalles
Good Display 600x448	5.83" B/W B/R/W or 7 Color Supported in our component with the classname gdew0583t7.h (monochrome version). Color models also supported in our ESP-IDF component Cale-idf.	web Detalles
Good Display 448x600	Portrait 5 inches Portrait version for this Goodisplay 5 inches eink or Waveshare 7 colors 448x600	web Detalles
Good Display 416x240	GDEW0371W7 3.7" This is an E ink E paper display panel, 3.71 inch, 416x240 resolution, 4 Grayscale, 24 pins FPC connection, optional FPC connector, communicating via SPI interface, with embedded controller and on-chip stored waveform, supports black and white. It's IC Driver is UC8171. In view of so many advantages: ultra low power consumption, near 180 degree view angle, readable under sunlight, Still not supported in Cale-idf. Please send us this epaper if you want that we add Espressif-IDF support for it.	web Detalles
Good Display 400x300	4.2" black B/R B/Y Many 4.2 inches models supported including: GDEW042T2 monochrome (4 gray levels still not supported) Gdeh042Z21.h Gdew042Z15 Gdew042C37 with 3 colors: black/red or black/yellow Gdeh042Z96.h with 3 colors: black/red/white For those who wan to use Arduino-esp32 the GxEPD classname is GDEW042T2.	web Detalles
Good Display 296x128	2.9" Still not supported in Cale-idf. Please send us this epaper if you want that we add Espressif-IDF support for it.	web Detalles
Good Display 264x176	2.7" Also sold by Waveshare in a model that has 4 front buttons like in this picture. This epaper comes also with touch from Good display. Please check our gdew027w3T class in our project Cale-idf.	web Detalles
Good Display 250x122	2.13" Supported in our ESP-IDF component Cale-idf: gdeh0213b73.h please note that this size can be also used for ATC_TLSR_Paper hacked price labels project and you can also send them using Bluetooth from CALE (Only Chrome for now) This is also the right resolution for the small 2.13 Lilygo T5 epaper. If you use this Lilygo small epaper tag we have a very nice housing 3D Model to print.	web Detalles
Plasticlogic 240x146	Plasticlogic Flex 2.1 inch PlasticLogic is a new german manufacturer of fast flexible epaper displays. They where kind enough to send me some samples so I added support in Cale-idf. This einks have 4 wire SPI so you can also read the temperature and display model: plasticlogic021.h super fast high quality flexible displays. They need their own mini-SPI adapter to connect it with ESP32.	web Detalles
Waveshare 212x104	2.13 Flexible	web Detalles
Good Display 200x200	1.54 This small epapers are great to make a watch or mini-gadget. Supported in our ESP-IDF component Cale-idf: gdep015OC1.h both Waveshare and Heltec have similar 1.54" models. gdeh0154d67.h use this class for Waveshare 1.54 V2 model since it has a different epaper controller.	web Detalles
Hanshow 122x250	ATC_TLSR_Paper This is a special size to use with ATC_TLSR_Paper project of hacked price labels. Using CALE you are now able to send images using Bluetooth low consumption.	web Detalles

CALE

Soporta ESP32 y ESP8266

Un configurador para multiples displays de E-ink

Modelo en 3D listo para tu impresora

Una pantalla siempre actualizada

Epaper displays soportados por el Firmware

GDEW101C01 10.1 inch e-paper display DES full color large

ED078kc2 Raw 7.8 parallel epaper

ED133UT2

EC060KH3

12.48inch Epaper display module

ED052TC4

ED097TC* / Inkplate 10

Parallel 6 inches

T5-4.7 inch E-paper ED047TC1

GOODISPLAY / DKE 10.2"

7.5" HD

7.5" B B/R B/Y

Inkplate 6

gdew075T7 x2 vertical

5.83" Black/Red

7.5" B/W B/R

wave4i7color 4.01 inches

5.83" B/W B/R/W or 7 Color

Portrait 5 inches

GDEW0371W7 3.7"

4.2" black B/R B/Y

2.9"

2.7"

2.13"

Plasticlogic Flex 2.1 inch

2.13 Flexible

1.54

ATC_TLSR_Paper